Editing XEP-0065: SOCKS5 Bytestreams

[[Category:XEP]]
[[Category:Translation]]
[[Category:XEP translation]]

{{warning|Этот текст не является официальным переводом документа [http://www.xmpp.org/extensions/xep-0065.html XEP-0065: SOCKS5 Bytestreams] и может не соответствовать оригиналу. Для разработки программ используйте официальный текст.}}

Этот документ определяет [[XEP|расширение протокола XMPP]] для установление [[out-of-band|внеканального]] байтового потока между двумя произвольными [[entity|сущностями]] Jabber.

: '''ПРИМЕЧАНИЕ:''' Настоящий протокол является [[Draft Standard|Черновым Стандартом]] [[XMPP Standards Foundation|Организации Стандартизации XMPP]]. Его реализации поощряются, и протокол подходит для развёртывания в производственных системах<!-- Implementations are encouraged and the protocol is appropriate for deployment in production systems -->, но прежде, чем он станет [[Final Standard|Окончательным Стандартом]], в протоколе могут произойти некоторые изменения.

= Входные данные =

== Информация о документе ==

* Категория: [[XEP]]
* Номер: 0065
* Издатель: [[XMPP Standards Foundation|Организации Стандартизации XMPP]]
* Статус: [[Draft Standard|Черновик]]
* Тип: {{fixme|Standards Track}}
* Версия: 1.7
* Последнее обновление: 2007-05-21
* Утвердивший орган: [[XMPP Council|Совет XMPP]]
* Опирается на:
** [[RFC 3920: XMPP Core|Основы XMPP]],
** RFC 1928: SOCKS Protocol Version 5,
** RFC 3174: US Secure Hash Algorithm 1 (SHA1),
** {{xep|0030|Service Discovery}}
* Заменяет: нет
* Заменяется: нет
* Короткое название: bytestreams (потоки байтов)
* Схема: http://www.xmpp.org/schemas/bytestreams.xsd
* Страница Вики: http://wiki.jabber.org/index.php/SOCKS5_Bytestreams_(XEP-0065)

== Информация об авторах ==

* [[Dave Smith|Дэйв Смит (Dave Smith)]]
*: Электропочта: dizzyd@jabber.org
*: JabberID: dizzyd@jabber.org
* [[Matthew Miller|Мэтью Миллер (Matthew Miller)]]
*: Электропочта: linuxwolf@outer-planes.net
*: JabberID: linuxwolf@outer-planes.net
* [[Peter Saint-Andre|Питер Сен-Андре (Peter Saint-Andre)]]
*: Электропочта: stpeter@jabber.org
*: JabberID: stpeter@jabber.org

== Надлежащее уведомление ==

На это [[XEP|расширение протокола XMPP]] распространяется авторское право 1999–2007 [[XMPP Standards Foundation|Организации Стандартизации XMPP]]. Документ полностью соответствует Стратегии XSF в Области Интеллектуальной Собственности (XSF's Intellectual Property Rights Policy, http://www.xmpp.org/extensions/ipr-policy.shtml). Этот материал может распространься только в соответствии с установленной далее Лицензией Творческих Общин «Указание Авторства» (Creative Commons Attribution License, http://creativecommons.org/licenses/by/2.5/)

{{todo|Почитать все эти документы и восстановить справедливость}}

== Место обсуждения ==

Рекомендуется вести обсуждение данного документа в почтовом списке обсуждения Стандартов (http://mail.jabber.org/mailman/listinfo/standards)

Поскольку [[XEP|расширение протокола XMPP]] нормативно ссылается на технологии [[IETF]], обсуждение в почтовом списке XSF-IETF также может затрагивать данный документ (см. http://mail.jabber.org/mailman/listinfo/jsf-ietf).

== Отношение к XMPP ==

[[XMPP|Расширяемый протокол передачи сообщений и информации о присутствии (XMPP)]] определён в документах [[RFC 3920: XMPP Core|«Основы XMPP» (RFC 3920)]] и [[RFC 3921: XMPP IM|«Обмен сообщениями в XMPP» (RFC 3921)]], внесённых [[XMPP Standards Foundation|Организацией Стандартизации XMPP]] в Процесс Стандартизации Интернета (Internet Standards Process), который управляется [[w:IETF|IETF]] в соответствии с RFC 2026. Каждый протокол, определённый в этом документе, разработан вне Процесса Стандартизации Интернета и должен рассматриваться как дополнение к XMPP, а не как развитие, продолжение самого XMPP.

== Слова соответствия ==

Следующие ключевые слова, используемые в настоящем документе, долны интерпретироваться в соответствии с RFC 2119:
: «ДОЛЖЕН»/«ДОЛЖНА»/«ДОЛЖНО»/«ДОЛЖНЫ», «ОБЯЗАТЕЛЕН»/«ОБЯЗАТЕЛЬНА»/«ОБЯЗАТЕЛЬНО»/«ОБЯЗАТЕЛЬНЫ»<!-- , "SHALL" -->;
: «НЕ ДОЛЖЕН»/«НЕ ДОЛЖНА»/«НЕ ДОЛЖНО»/«НЕ ДОЛЖНЫ»<!-- , "SHALL NOT" -->;
: «СЛЕДУЕТ», «РЕКОМЕНДУЕТСЯ»;
: «СЛЕДУЕТ НЕ», «РЕКОМЕНДУЕТСЯ НЕ»;
: «МОЖЕТ»/«МОГУТ», «НЕОБЯЗАТЕЛЬНЫЙ»/«НЕОБЯЗАТЕЛЬНАЯ»/«НЕОБЯЗАТЕЛЬНОЕ»/«НЕОБЯЗАТЕЛЬНЫЕ».

= Описание протокола =

== Введение ==

[[XMPP]] разработан для пересылки сравнительно малых кусков [[XML]] между [[entity|сетевыми сущностями]] (см. «[[RFC 3920: XMPP Core|Основы XMPP]]») и не предназначен для пересылки двоичных данных. Тем не менее, иногда требуется передать двоичные данные другой сущности, найденной в сети XMPP (например, передать файл). Поэтому в сообществе Jabber многие признают, что было бы полезно иметь общий протокол для пересылки двоичных данных между двумя произвольными сущностями в сети. Основным приложением такой технологии передачи была бы [[file transfer|передача файлов]], для которой в настоящее время есть несколько несовместимых протоколов (что выливается в отсутствие совместимости). Тем не менее, возможны и другие приложения, из-за которых важно разработать общий протокол, а не ограниченный частным применением, таким, передача файлов. Этот документ определяет протокол, удовлетворяющий следующим условиям:
* Байтовые потоки устанавливаются поверх стандартных соединений [[w:TCP|TCP]] (RFC 793) или [[w:UDP|UDP]] (RFC 768), причём поддержка TCP ОБЯЗАТЕЛЬНА, а поддержка UDP НЕОБЯЗАТЕЛЬНА.
* [[w:Сокет|Сокеты]] могут быть прямыми (peer-to-peer) или опосредованными (устанавливаемыми через передающий сервис).
* Где возможно, используются стандартные протоколы передачи.

Конкретно, данный документ предполагает, что сообщество Jabber пользуется протоколом [[w:en:SOCKS|SOCKS 5]] — технологией передачи данных, принятой [[w:IETF|IETF]] и совместимой с [[w:IPv6|IPv6]]. (Примечание: Предлагаемая технология использует подмножество протокола SOCKS 5, специально адаптированное для передачи данных в Jabber, поэтому существующие SOCKS 5 [[proxy|прокси-серверы]] не могут использоваться для её реализации без соответствующей доработки.)

== Терминология ==

В документе используются следующие термины.

<div id="table_1">[[#table_1|Таблица 1: Словарь Сущностей]]</div>

{| class="standard"
 ! Термин !! Описание
 |-
 | Инициатор || [[Entity|Сущность]] Jabber, которая желает установить сеанс передачи данных с другой Сущностью.
 |-
 | Цель || Сущность, с которой Инициатор пытается установить сеанс передачи.
 |-
 | Посредник || Сущность Jabber, не находящаяся за [[w:NAT|NAT-маршрутизатором]] или [[w:Межсетевой экран|межсетевым экраном]] и желающая выступать промежуточным звеном при передаче файлов между Инициатором и Целью.
 |-
 | ВедущийУзел || Система, к которой подключается Цель и которая управляет передачей. ВедущимУзлом может быть либо Инициатор, либо Посредник.
 |-
 | ИдПередачи || Относительно уникальный идентификатор передачи для этого соединения. Он генерируется Инициатором и используется для контроля передачи. Его длина ДОЛЖНА быть меньше 128 символов.
 |}

== Narrative ==
{{todo|Как перевести название?}}

Возможны два сценария, для которых предназначен этот протокол:
# прямое соединение (т.е. ВедущийУзел — Инициатор);
# опосредованное соединение (т.е. ВедущийУзел — Посредник).

Нормальный ход этих сценариев описан ниже для простоты понимания. Полное описание этих сценариев зафиксировано в разделе {{fixme|[[#Formal Use Case|Formal Use Case]]}}. Здесь описывается только TCP-соединение, UDP-связь описывается в разделе {{fixme|[[#Optional UDP Support|Optional UDP Support]]}} настоящего документа.

=== Прямое соединение ===

Простейший случай — это прямое соединение. В этой ситуации ВедущимУзлом выступает Инициатор (ВедущийУзел/Инициатор). Это означает, что Инициатор знает сетевой адрес ВедущегоУзла и способ активации передачи. Процесс установки соединения и передачи в этом случае следующий:

# Инициатор посылает Цели [[iq|IQ-запрос (set)]], указывая [[JID|полный JID]] ВедущегоУзла/Инициатора, а также ИдПередачи предлагаемого канала передачи.
# Цель открывает TCP-соединение по указанному сетевому адресу.
# Цель запрашивает соединение через SOCKS5 со значениями адреса приёмника (DST.ADDR) и порта приёмника (DST.PORT), указанными ниже.
# ВедущийУзел/Инициатор посылает подтверждение успешного соединения с Целью по SOCKS5.
# Цель отправляет [[iq|IQ-ответ (result)]] Инициатору, используя в нём идентификатор начальной IQ-последовательности.
# ВедущийУзел/Инициатор активирует передачу.
# Инициатор и Цель могут начать пересылку данных.

=== Опосредованное соединение ===

Опосредованное соединение немного сложнее. В этом случае ВедущимУзлом является не Инициатор, а Посредник; это означает, что Инициатор должен узнать сетевой адрес ВедущегоУзла перед посылкой начального [[iq|запроса IQ-set]], должен согласовать соединение с ВедущимУзлом таким же образом, как и Цель, и должен запросить, чтобы ВедущийУзел активировал канал передачи прежде, чем он может быть использован. Процесс установки каналов передачи таков:

# (Необязательный пункт) Инициатор узнаёт сетевой адрес ВедущегоУзла [[in-band|внутри канала XMPP]].
# Инициатор посылает Цели запрос IQ-set с указанием [[JID|полного JID]] и сетевого адреса ВедущегоУзла, а также <span id="SID_definition">ИдПередачи (StreamID, SID)</span> предлагаемого канала передачи.
# Цель открывает соединение [[w:TCP|TCP]] с выбранным ВедущимУзлом.
# Цель устанавливает соединение по SOCKS5 со значениями адреса приёмника (DST.ADDR) и порта приёмника (DST.PORT), определёнными ниже.
# ВедущийУзел посылает подтверждение успешного соединения с Целью по SOCKS5.
# Цель посылает Инициатору [[iq|результат IQ-result]], используя идентификатор (параметр 'id') исходного запроса IQ-set.
# Инициатор открывает соединение TCP с ВедущимУзлом.
# Инициатор устанавливает соединение по SOCKS5 со значениями адреса приёмника (DST.ADDR) и порта приёмника (DST.PORT), определёнными ниже.
# ВедущийУзел посылает подтверждение успешного соединения с Инициатором по SOCKS5.
# Инициатор посылает IQ-set ВедущемуУзлу с запросом активации ВедущимуУзлом канала передачи, связанного с ИдПередачи.
# ВедущийУзел активирует канал передачи. (Данные теперь перенаправляются посредником [прокси] из одного соединения SOCKS5 в другое.)
# ВедущийУзел посылает результат IQ-result Инициатору, подтверждающий, что канал передачи активирован (или сообщающий об ошибке).
# Инициатор и Цель могут начинать использовать канал передачи.

== Протокол ==

=== Initiator Queries Target Regarding Bytestreams Support ===

Before attempting to initiate a bytestream, the Initiator may want to know if the Target supports the bytestream protocol. It may do so using Service Discovery [4] as follows:

Example 1. Initiator Sends Service Discovery Request to Target
<iq type='get' 
    from='initiator@host1/foo' 
    to='target@host2/bar' 
    id='hello'>
  <query xmlns='http://jabber.org/protocol/disco#info'/>
</iq>
    

If the Target supports bytestreams, it MUST answer to that effect in the service discovery result.

Example 2. Target Replies to Service Discovery Request
<iq type='result' 
    from='target@host2/bar' 
    to='initiator@host1/foo' 
    id='hello'>
  <query xmlns='http://jabber.org/protocol/disco#info'>
    <identity 
        category='proxy'
        type='bytestreams'
        name='SOCKS5 Bytestreams Service'/>
    ...
    <feature var='http://jabber.org/protocol/bytestreams'/>
    ...
  </query>
</iq>
    
=== Initiator Queries Server For Proxies ===

Before attempting to initiate a bytestream, the Initiator needs to find a proxy. It may do so using Service Discovery as follows:

Example 3. Initiator Sends Service Discovery Request to Server
<iq type='get' 
    from='initiator@host1/foo'
    to='host1' 
    id='server_items'>
  <query xmlns='http://jabber.org/protocol/disco#items'/>
</iq>
    

The server will return all of the known JIDs in its disco list.

Example 4. Server Replies to Service Discovery Request
<iq type='result' 
    from='host1' 
    to='initiator@host1/foo' 
    id='server_items'>
  <query xmlns='http://jabber.org/protocol/disco#items'>
    ...
    <item jid='proxy.host3' name='Bytestreams Proxy'/>
    ...
  </query>
</iq>
    
=== Initiator Queries Proxy to Find Out if it is a Proxy ===

For each item in the disco#items result, the Initiator must query to determine if it is a bytestreams proxy. It may do so using Service Discovery as follows:

Example 5. Initiator Sends Service Discovery Request to Proxy
<iq type='get' 
    from='initiator@host1/foo'
    to='proxy.host3' 
    id='proxy_info'>
  <query xmlns='http://jabber.org/protocol/disco#info'/>
</iq>
    

The proxy will return its information. The Initiator SHOULD inspect each identity to see if it contains an identity of category "proxy" and type "bytestreams".

Example 6. Server Replies to Service Discovery Request
<iq type='result' 
    from='proxy.host3' 
    to='initiator@host1/foo' 
    id='proxy_info'>
  <query xmlns='http://jabber.org/protocol/disco#info'>
    ...
    <identity category='proxy'
              type='bytestreams'
              name='SOCKS5 Bytestreams Service'/>
    ...
    <feature var='http://jabber.org/protocol/bytestreams'/>
    ...
  </query>
</iq>
    
=== Initiator Discovers Network Address of StreamHost ===

If the StreamHost is a Proxy, the Initiator must first request the full network address used for bytestreaming (obviously this is not required if the StreamHost is the Initiator). This is done by sending an IQ-get to the proxy in the bytestreams namespace, as follows:

Example 7. Initiator Requests Network Address from Proxy
<iq type='get' 
    from='initiator@host1/foo' 
    to='proxy.host3' 
    id='discover'>
  <query xmlns='http://jabber.org/protocol/bytestreams'/>
</iq>
    

The <streamhost/> element specifying a network address MUST possess the following attributes:
jid = the JID of the StreamHost for communications over Jabber

In addition, the <streamhost/> element MUST include:

EITHER
host = the hostname or IP address of the StreamHost for SOCKS5 communications over TCP
port = a port associated with the hostname or IP address for SOCKS5 communications over TCP

OR
zeroconf = a zeroconf [5] identifier to which an entity may connect, for which the service identifier and protocol name SHOULD be "_jabber.bytestreams".

Example 8. Proxy Informs Initiator of Network Address
<iq type='result' 
    from='proxy.host3' 
    to='initiator@host1/foo' 
    id='discover'>
  <query xmlns='http://jabber.org/protocol/bytestreams'>
    <streamhost 
        jid='proxy.host3' 
        host='24.24.24.1' 
        zeroconf='_jabber.bytestreams'/>
  </query>
</iq>
    

If the Initiator does not have permissions to initiate bytestreams on the Proxy for whatever reason (e.g., a proxy implementation may enable administrators to ban JIDs or domains from using the Proxy), the Proxy MUST return a <forbidden/> error to the Initiator (for information about error syntax, refer to Error Condition Mappings [6]):

Example 9. Proxy Returns Error to Initiator
<iq type='error' 
    from='initiator@host1/foo' 
    to='proxy.host3' 
    id='discover'>
  <query xmlns='http://jabber.org/protocol/bytestreams'/>
  <error code='403' type='auth'>
    <forbidden xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
  </error>
</iq>
    

If the Proxy is unable to act as a StreamHost, the Proxy SHOULD return a <not-allowed/> error to the Initiator:

Example 10. Proxy Returns Error to Initiator
<iq type='error' 
    from='initiator@host1/foo' 
    to='proxy.host3' 
    id='discover'>
  <query xmlns='http://jabber.org/protocol/bytestreams'/>
  <error code='405' type='cancel'>
    <not-allowed xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
  </error>
</iq>
    
=== Initiator Informs Target of StreamHosts ===

In order to establish a bytestream between the Initiator and the Target, the Initiator must provide network address information for the StreamHost(s) to the Target. This happens in-band via a single IQ-set, which must contain the following information:
The network address of at least one StreamHost to which the Target may attempt to connect
The Stream ID for this connection
The "mode" to use, normally "tcp" but optionally "udp" (see the Optional UDP Support section of this document)

The protocol format is shown below.

Example 11. Initiation of Interaction
<iq type='set' 
    from='initiator@host1/foo' 
    to='target@host2/bar' 
    id='initiate'>
  <query xmlns='http://jabber.org/protocol/bytestreams' 
         sid='mySID' 
	 mode='tcp'>
    <streamhost 
        jid='initiator@host1/foo' 
        host='192.168.4.1' 
        port='5086'/>
    <streamhost 
        jid='proxy.host3' 
        host='24.24.24.1' 
        zeroconf='_jabber.bytestreams'/>
  </query>
</iq>
    

If the Target is unwilling to accept the bytestream, it MUST return a <not-acceptable/> error to the Initiator.

Example 12. Target Refuses Bytestream
<iq type='error' 
    from='target@host2/bar' 
    to='initiator@host1/foo' 
    id='initiate'>
  <error code='406' type='auth'>
    <not-acceptable xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
  </error>
</iq>
    
=== Target Establishes SOCKS5 Connection with StreamHost ===

If the Target is willing to accept the bytestream, it MUST attempt to open a standard TCP socket on the network address of the StreamHost communicated by the Initiator. If the Initiator provides more than one StreamHost, the Target SHOULD try to connect to them in the order they occur.

If the Target tries but is unable to connect to any of the StreamHosts and it does not wish to attempt a connection from its side, it MUST return a <item-not-found/> error to the Initiator.

Example 13. Target Is Unable to Connect to Any StreamHost and Wishes to End Transaction
<iq type='error' 
    from='target@host2/bar' 
    to='initiator@host1/foo' 
    id='initiate'>
  <error code='404' type='cancel'>
    <item-not-found xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
  </error>
</iq>
    

If the Target is able to open a TCP socket on a StreamHost, it MUST utilize the SOCKS5 protocol specified in RFC 1928 [7] to establish the connection with the StreamHost. In accordance with the SOCKS5 RFC, the Target MAY have to authenticate in order to use the proxy. However, any authentication required is beyond the scope of this document.

Once the Target has successfully authenticated with the Proxy (even anonymously), it SHOULD send a CONNECT request to the appropriate host in order to continue the negotiation. The following rules apply:
The hostname MUST be SHA1(SID + Initiator JID + Target JID) where the definition of the SHA1 hashing algorithm is as specified by RFC 3174 [8] and the output is hexadecimal-encoded (not binary).
The port MUST be 0 (zero).
The JIDs provided MUST be the JIDs used for the IQ exchange, which MAY be full JIDs (<node@domain.tld/resource>) or bare JIDs (<node@domain.tld>).
The appropriate stringprep profiles (as specified in XMPP Core [9]) MUST be applied to the JIDs before application of the SHA1 hashing algorithm.

Example 14. Target Connects to StreamHost
CMD = X'01'
ATYP = X'03'
DST.ADDR = SHA1 Hash of: (SID + Initiator JID + Target JID)
DST.PORT = 0
    

Example 15. StreamHost Acknowledges Connection
STATUS = X'00'
    

When replying to the client in accordance with Section 6 of RFC 1928, the StreamHost SHOULD set the BND.ADDR and BND.PORT to the values provided by the client in the connection request.

=== Target Acknowledges SOCKS5 Connection ===

After the Target has authenticated with the StreamHost, it MUST send an IQ-result to the Initiator indicating which StreamHost was used.

Example 16. Target Notifies Initiator of Connection
<iq type='result' 
    from='target@host2/bar' 
    to='initiator@host1/foo' 
    id='initiate'>
  <query xmlns='http://jabber.org/protocol/bytestreams'>
    <streamhost-used jid='proxy.host3'/>
  </query>
</iq>
    

At this point, the Initiator knows which StreamHost was used by the Target.

=== Initiator Establishes SOCKS5 Connection with StreamHost ===

If the StreamHost used is a Proxy, the Initiator MUST authenticate and establish a connection with the StreamHost before requesting that the StreamHost activate bytestream. The Initiator will establish a connection to the SOCKS5 proxy in the same way the Target did (passing the same value for the CONNECT request), as shown in the following examples.

Example 17. Initiator Connects to StreamHost
CMD = X'01'
ATYP = X'03'
DST.ADDR = SHA1 Hash of: (SID + Initiator JID + Target JID)
DST.PORT = 0
    

Example 18. StreamHost Acknowledges Connection to Initiator
STATUS = X'00'
    
=== Activation of Bytestream ===

In order for the bytestream to be used, it MUST first be activated by the StreamHost. If the StreamHost is the Initiator, this is straightforward and does not require any in-band protocol. However, if the StreamHost is a Proxy, the Initiator MUST send an in-band request to the StreamHost. This is done by sending an IQ-set to the Proxy, including an <activate/> element whose XML character data specifies the full JID of the Target.

Example 19. Initiator Requests Activation of Bytestream
<iq type='set' 
    from='initiator@host1/foo' 
    to='proxy.host3' 
    id='activate'>
  <query xmlns='http://jabber.org/protocol/bytestreams' sid='mySID'>
    <activate>target@host2/bar</activate>
  </query>
</iq>
    

Using this information, with the SID and from address on the packet, the Proxy is able to activate the stream by hashing the SID + Initiator JID + Target JID. This provides a reasonable level of trust that the activation request came from the Initiator.

If the Proxy can fulfill the request, it MUST then respond to the Initiator with an IQ-result.

Example 20. Proxy Informs Initiator of Activation
<iq type='result' 
    from='proxy.host3' 
    to='initiator@host1/foo' 
    id='activate'/>
    

If the Proxy cannot fulfill the request, it MUST return an IQ-error to the Initiator; the following conditions are defined:
<item-not-found/> error if the from address does not match that of the Initiator's full JID
<not-allowed/> error if only one party (either Initiator or Recipient, but not both) is connected to the Proxy
<internal-server-error/> error if the proxy cannot activate the bytestream because of some internal malfunction

== Formal Use Case ==

This is a formal representation of the narrative information provided above. The primary actor is the Initiator and the goal is to establish a bytestream between the Initiator and the Target. (Note: "UCE" stands for "Use Case Ends" (success is assumed unless otherwise specified), "P" stands for "Primary Flow", and "A" stands for "Alternate Flow".)
=== Primary Flow ===
Initiator wishes to establish a bytestream with Target
Initiator sends an IQ-set to Target specifying a StreamID and the network addresses of one or more StreamHosts [A1]
Target wishes to establish a bytestream with Initiator [A2]
Target requests TCP connection with a StreamHost [A3]
Target receives TCP acknowledgement from StreamHost [A4]
Target provides authentication credentials to StreamHost via SOCKS5
Target receives acknowledgement of authentication with StreamHost via SOCKS5 [A5]
Target requests connection with StreamHost via SOCKS5
Target receives acknowledgement of successful connection with StreamHost via SOCKS5 [A7]
Target sends IQ-result to Initiator announcing successful connection to StreamHost [A6]
Use Case Ends (bytestream is established and ready for use)
=== Alternate Flows ===

A1. Initiator does not know the full network address of a StreamHost (i.e., Proxy)
Initiator sends IQ-get to Proxy
Initiator receives IQ-result from Proxy containing network address [A9][A10]
Return to P2

A2. Target does not wish to establish a bytestream with Initiator
Initiator receives <not-acceptable/> error from Target
UCE unsuccessfully

A3. No more StreamHosts in list (Target is unable to reach any of the provided StreamHosts)
Target returns <remote-server-not-found/> error to Initiator
UCE unsuccessfully

A4. Target cannot reach StreamHost
Return to P4

A5. Target authentication with StreamHost fails
Return to P4

A6. Proxy is unwilling to act as a StreamHost for Initiator
Initiator receives <forbidden/> error from Proxy
Return to P2

A7. Proxy is unable to act as a StreamHost for Initiator
Initiator receives <not-allowed/> error from Proxy
Return to P2

A8. Target connects to a Proxy
Initiator reaches Proxy [A9]
Target receives TCP acknowledgement from StreamHost [A9]
Initiator authenticates with Proxy via SOCKS5
Initiator receives acknowledgement of authentication with Proxy via SOCKS5 [A10]
Initiator requests connection with Proxy via SOCKS5
Initiator receives acknowledgement of successful connection with Proxy via SOCKS5 [A11]
Initiator sends IQ-set to Proxy requesting activation of bytestream
Initiator receives IQ-result from Proxy acknowledging activation of bytestream [A12]
Return to P9

A9. Initiator is unable to reach Proxy
UCE unsuccessfully

A10. Initiator is unable to authenticate with Proxy
UCE unsuccessfully

A11. Initiator is unable to connect to Proxy
UCE unsuccessfully

A12. Proxy is unable to activate bytestream
Initiator receives <internal-server-error/> error from Proxy
UCE unsuccessfully
== Formal Description ==
=== <query/> Element ===

The <query/> element is the container for all in-band communications. This element MUST be in the namespace "http://jabber.org/protocol/bytestreams". This element has a single attribute for the stream session identifier, and contains multiple <streamhost/> elements, a single <streamhost-used/> element, or a single <activate/> element.

The "sid" specifies the bytestream session identifier. This attribute MUST be present. The value of this attribute is any character data.

The "mode" specifies the mode to use, either 'tcp' or 'udp'. If this attribute is missing, the default value of "tcp" MUST be assumed.

The <streamhost/> element conveys the network connection information. At least one instance MUST be present in the initial IQ-set from the Initiator to the Target. If multiple instances of this element are present, each one MUST be a separate host/port combination.

The <streamhost-used/> element transports the out-of-band token. It MUST be present in the IQ-set from the Target to the Initiator, and there MUST be only one instance.

The <activate/> element is used to request activation of a unidirectional or bidirectional bytestream. It MUST be present in the IQ-set sent from the Initiator to the StreamHost after the Initiator receives an IQ-result from the Target, and there MUST be only one instance.
=== <streamhost/> Element ===

The <streamhost/> element contains the bytestream connection information. This element has attributes for the StreamHost's JID, network host/address, and network port. This element MUST NOT contain any content nodes.

The "jid" attribute specifies the StreamHost's JID. This attribute MUST be present, and MUST be a valid JID for use with an <iq/>.

The "host" attribute specifies the host to connect to. This attribute MUST be present. The value MUST be either a resolvable domain name or the "dotted decimal" IP address (e.g. "1.2.3.4").

The "port" attribute specifies the port to connect to. This attribute MAY be present. The value MUST be a valid port number in decimal form.

The "zeroconf" attribute specifies the zero-configuration service available for bytestreaming. This attribute SHOULD be present. The value SHOULD be '_jabber.bytestreams'.

When communicating the available hosts, the Initiator MUST include EITHER the host and port OR the zeroconf information.
=== <streamhost-used/> Element ===

The <streamhost-used/> element indicates the StreamHost connected to. This element has a single attribute for the JID of the StreamHost to which the Target connected. This element MUST NOT contain any content node.

The "jid" attribute specifies the full JID of the StreamHost. This attribute MUST be present, and MUST be a valid JID for use with an <iq/>.
=== <activate/> Element ===

The <activate/> element is a flag to trigger a Proxy to complete a connection.
== Optional UDP Support ==

Support for UDP associations is strictly OPTIONAL. However, implementations that support UDP associations MUST adhere to the profile described in this section.
=== Discovering UDP Support ===

If an implementation supports UDP associations, it MUST advertise that separately by returning a feature of 'http://jabber.org/protocol/bytestreams#udp' in response to Service Discovery information requests.

Example 21. Initiator Sends Service Discovery Request to Target
<iq type='get' 
    from='initiator@host1/foo' 
    to='target@host2/bar' 
    id='hello2'>
  <query xmlns='http://jabber.org/protocol/disco#info'/>
</iq>
    

If the Target supports UDP associations, it MUST answer to that effect in the service discovery result.

Example 22. Target Replies to Service Discovery Request
<iq type='result' 
    from='target@host2/bar' 
    to='initiator@host1/foo' 
    id='hello2'>
  <query xmlns='http://jabber.org/protocol/disco#info'>
    <identity 
        category='proxy'
        type='bytestreams'
        name='SOCKS5 Bytestreams Service'/>
    ...
    <feature var='http://jabber.org/protocol/bytestreams'/>
    <feature var='http://jabber.org/protocol/bytestreams#udp'/>
    ...
  </query>
</iq>
    
=== Requesting UDP Mode ===

UDP associations are requested by setting the 'mode' attribute to a value of "udp" rather than "tcp".

Example 23. Initiation of Interaction (UDP)
<iq type='set' 
    from='initiator@host1/foo' 
    to='target@host2/bar' 
    id='initiate'>
  <query xmlns='http://jabber.org/protocol/bytestreams' 
         sid='mySID' 
	 mode='udp'>
    <streamhost 
        jid='initiator@host1/foo' 
        host='192.168.4.1' 
        port='5086'/>
  </query>
</iq>
    
=== UDP Process ===

There is one main difference between UDP mode and TCP mode: rather than simply establishing a TCP connection, the Target and/or Initiator MUST (1) establish a UDP association and then (2) initialize the UDP channel. In particular:
If direct connection is followed, Target MUST complete UDP association and initialization of the UDP channel before informing Initiator of success via the <streamhost-used/> element.
If mediated connection is followed, (1) Target MUST complete UDP association and initialization of the UDP channel before informing Initiator of success via the <streamhost-used/> element, and (2) Initiator MUST complete UDP association and initialization of the UDP channel before asking StreamHost to activate the bytestream.

The processes for establishing the UDP association and for initializing the UDP channel are described below.
==== Establishing the UDP Association ====

Once the Target has successfully authenticated with the Proxy (as described under Target Establishes SOCKS5 Connection with StreamHost), it MUST send a UDP ASSOCIATE (rather than CONNECT) request to the host identified by the algorithm defined above.

Example 24. Target Requests UDP Association with StreamHost
CMD = X'03'
ATYP = X'03'
DST.ADDR = SHA1 Hash of: (SID + Initiator JID + Target JID)
DST.PORT = 0
      

The StreamHost then acknowledges this request:

Example 25. StreamHost Acknowledges Request
STATUS = X'00'
      
==== Initializing the UDP Channel ====

After connecting to the StreamHost, the Target (direct connection) or both Target and Initiator (mediated connection) MUST initialize the UDP channel. In order to do so, each sending entity MUST send a SOCKS5 UDP packet to the StreamHost on the same port used for the initial TCP connection (in the foregeoing example, a host of 192.168.4.1 and port of 5086), with DST.PORT set to '1' and DATA containing the sending entity's JID (i.e, the JID of either the Target or Initiator).

Example 26. Target or Initiator Sends UDP Initialization Packet to StreamHost
ATYP = X'03'
DST.ADDR = SHA1 Hash of: (SID + Initiator JID + Target JID)
DST.PORT = 1
DATA = Target or Initiator JID
      

Upon successful receipt by the StreamHost, the StreamHost MUST reply with a message notification indicating success:

Example 27. StreamHost Notifies Target or Initiator of UDP Success
<message 
    from='proxy.host3' 
    to='target@host2/bar' 
    id='initiate'>
  <udpsuccess xmlns='http://jabber.org/protocol/bytestreams' dstaddr='Value of Hash'/>
</message>
      

The <udpsuccess/> element indicates that the StreamHost has received a UDP initialization packet. This element has a single attribute containing the DST.ADDR that was used in the UDP packet.

If Target is unable to initialize the UDP channel, it MUST return a <remote-server-not-found/> error to Initiator.

Note: Since UDP is not reliable, the Target SHOULD resend the UDP packet if the reply notification is not received within a short time (a 5-second retry is RECOMMENDED). The StreamHost SHOULD ignore duplicate UDP initialization packets once it has replied with a notification.
=== Exchanging UDP Packets ===

Once the UDP association is established, UDP packets can be exchanged with the StreamHost. When a UDP packet is sent by either party, it MUST contain a 4-byte header (in addition to other possible headers, such as that of SOCKS5), which consists of the source virtual port and then the destination virtual port of the packet, both 16-bit values in network byte order. This allows the peers to multiplex many packets for different purposes over one session. The actual application data should follow this header, and thus the payload size will always be "Application Data Size + 4".

For all packets sent to the StreamHost, DST.PORT is set to 0, and DATA contains the payload.

Example 28. Sending UDP to StreamHost
ATYP = X'03'
DST.ADDR = SHA1 Hash of: (SID + Initiator JID + Target JID)
DST.PORT = 0
DATA = (payload)
    

UDP packets sent from the StreamHost do not have any SOCKS5 headers, and so the payload should be delivered as-is.

The programming interface for a SOCKS5 Bytestreams-aware UDP MUST report an available buffer space for UDP datagrams that is smaller than the actual space provided by the operating system and SOCKS5 layer if applicable. In other words, 4 more octets smaller.
== Implementation Notes ==
=== StreamHost Requirements ===

A StreamHost MUST support TCP connections.

A StreamHost SHOULD:
Allow bi-directional bytestreaming between the Initiator and Target.
Allow only one Target to connect to a bytestream (i.e., disallow multicasting).
Track sessions based on a combination of the StreamID and the Initiator's full JID, thus allowing an Initiator to create more than one simultaneous session.
Ignore but not drop any bytes sent before the bytestream is activated.
Prefer to use zero-configuration IP networking if supported.

A StreamHost MAY:
Support UDP associations in addition TCP connections.
Ignore the DST.ADDR and DST.PORT parameters if desired.
=== SOCKS5 Parameter Mapping ===

To facilitate the usage of SOCKS5, command parameters MUST be mapped to the appropriate values. Parameters not specified in the table below SHOULD be used as defined in RFC 1928.

Table 2: Request/Parameter Mapping for CONNECTParameter	Value
CMD	1 (CONNECT)
ATYP	Hardcoded to 3 (DOMAINNAME) in this usage
DST.ADDR	SHA1 Hash of: (SID + Initiator JID + Target JID)
DST.PORT	0


Table 3: Request/Parameter Mapping for UDP ASSOCIATEParameter	Value
CMD	3 (UDP ASSOCIATE)
ATYP	Hardcoded to 3 (DOMAINNAME) in this usage
DST.ADDR	SHA1 Hash of: (SID + Initiator JID + Target JID)
DST.PORT	0


Table 4: Request/Parameter Mapping for UDP PacketsParameter	Value
ATYP	Hardcoded to 3 (DOMAINNAME) in this usage
DST.ADDR	SHA1 Hash of: (SID + Initiator JID + Target JID)
DST.PORT	0 or 1, for payload or initialization packets, respectively.

== Security Considerations ==

This proposal does not include a method for securing or encrypting SOCKS5 bytetreams. If such security is desired, it MUST be negotiated over the bytestream (once established) using standard protocols such as SSL or TLS. Negotiation of such security methods is outside the scope of this document.
== IANA Considerations ==

This document requires no interaction with the Internet Assigned Numbers Authority (IANA) [10].
== XMPP Registrar Considerations ==
=== Protocol Namespaces ===

The XMPP Registrar [11] includes 'http://jabber.org/protocol/bytestreams' in its registry of protocol namespaces.
=== Service Discovery Features ===

The XMPP Registrar shall includes 'http://jabber.org/protocol/bytestreams#udp' in its registry of service discovery features.
=== Service Discovery Category/Type ===

The XMPP Registrar includes the "proxy" category and associated "bytestreams" type in the Service Discovery registry. The registry submission is as follows:

  <category>
    <name>proxy</name>
    <desc>Proxy servers or services</desc>
    <type>
      <name>bytestreams</name>
      <desc>A proxy for SOCKS5 bytestreams</desc>
      <doc>XEP-0065</doc>
    </type>
  </category>
    
== Schema ==

<?xml version='1.0' encoding='UTF-8'?>

<xs:schema
    xmlns:xs='http://www.w3.org/2001/XMLSchema'
    targetNamespace='http://jabber.org/protocol/bytestreams'
    xmlns='http://jabber.org/protocol/bytestreams'
    elementFormDefault='qualified'>

  <xs:annotation>
    <xs:documentation>
      The protocol documented by this schema is defined in
      XEP-0065: http://www.xmpp.org/extensions/xep-0065.html
    </xs:documentation>
  </xs:annotation>

  <xs:element name='query'>
    <xs:complexType>
      <xs:choice>
        <xs:element ref='streamhost' minOccurs='0' maxOccurs='unbounded'/>
        <xs:element ref='streamhost-used' minOccurs='0'/>
        <xs:element name='activate' type='empty' minOccurs='0'/>
      </xs:choice>
      <xs:attribute name='sid' type='xs:string' use='optional'/>
      <xs:attribute name='mode' use='optional' default='tcp'>
        <xs:simpleType>
          <xs:restriction base='xs:NCName'>
            <xs:enumeration value='tcp'/>
            <xs:enumeration value='udp'/>
          </xs:restriction>
        </xs:simpleType>
      </xs:attribute>
    </xs:complexType>
  </xs:element>

  <xs:element name='streamhost'>
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base='empty'>
          <xs:attribute name='jid' type='xs:string' use='required'/>
          <xs:attribute name='host' type='xs:string' use='required'/>
          <xs:attribute name='zeroconf' type='xs:string' use='optional'/>
          <xs:attribute name='port' type='xs:string' use='optional'/>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>

  <xs:element name='udpsuccess'>
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base='empty'>
          <xs:attribute name='dstaddr' type='xs:string' use='required'/>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>

  <xs:element name='streamhost-used'>
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base='empty'>
          <xs:attribute name='jid' type='xs:string' use='required'/>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>

  <xs:simpleType name='empty'>
    <xs:restriction base='xs:string'>
      <xs:enumeration value=''/>
    </xs:restriction>
  </xs:simpleType>

</xs:schema>

= Выходные данные =

== Notes ==

1. RFC 3920: Extensible Messaging and Presence Protocol (XMPP): Core <http://tools.ietf.org/html/rfc3920>.

2. RFC 793: Transmission Control Protocol <http://tools.ietf.org/html/rfc0793>.

3. RFC 768: User Datagram Protocol <http://tools.ietf.org/html/rfc0768>.

4. XEP-0030: Service Discovery <http://www.xmpp.org/extensions/xep-0030.html>.

5. Zeroconf is a set of protocols that enable IP networking without the need for configuration. For further information, refer to <http://www.zeroconf.org/>.

6. XEP-0086: Error Condition Mappings <http://www.xmpp.org/extensions/xep-0086.html>.

7. RFC 1928: SOCKS Protocol Version 5 <http://tools.ietf.org/html/rfc1928>.

8. RFC 3174: US Secure Hash Algorithm 1 (SHA1) <http://tools.ietf.org/html/rfc3174>.

9. RFC 3920: Extensible Messaging and Presence Protocol (XMPP): Core <http://tools.ietf.org/html/rfc3920>.

10. The Internet Assigned Numbers Authority (IANA) is the central coordinator for the assignment of unique parameter values for Internet protocols, such as port numbers and URI schemes. For further information, see <http://www.iana.org/>.

11. The XMPP Registrar maintains a list of reserved protocol namespaces as well as registries of parameters used in the context of XMPP extension protocols approved by the XMPP Standards Foundation. For further information, see <http://www.xmpp.org/registrar/>.
== Revision History ==
Version 1.7 (2007-05-21)

Incorporated errata: specified format for SHA1 output; specified BND.ADDR and BND.PORT for SOCKS5 reply; removed extraneous SOCKS5 acknowledgement example from Section 4.9; clarified rules for creation of SOCKS5 connection request in Section 4.6; added examples to Section 4.8; specified that ATYP value is hardcoded to 3 in this usage.
(psa) 
Version 1.6 (2004-11-12)

Added UDP support (OPTIONAL).
(ds/psa) 
Version 1.5 (2004-06-29)

Added requirement to apply stringprep profiles before SHA1 hashing; added reference to RFC 3174.
(psa) 
Version 1.4 (2004-06-28)

Cleaned up narratives to reflect current practices and removed unnecessary authentication references; fixed mismatch SOCKS5 parameter table values.
(ds) 
Version 1.3 (2003-09-24)

Added disco#info <identity/> and corresponding XMPP Registrar submission; added XMPP error handling.
(psa) 
Version 1.2 (2003-07-15)

Removed SIDs from the result queries, you should key off the IQ 'id' attribute instead. Added the disco exchange for finding available proxies.
(rwe) 
Version 1.1 (2003-07-09)

Changed srvid to zeroconf; cleaned up use cases; updated the schema.
(ds) 
Version 1.0 (2003-04-21)

Per a vote of the Jabber Council, advanced status to Draft.
(psa) 
Version 0.7 (2003-03-04)

Clarified that this proposal uses an adaptation of the SOCKS5 protocol, not the full protocol; replaced DTD with schema; added security considerations.
(psa) 
Version 0.6 (2003-01-27)

Added service discovery example; added 'srvid' attribute to streamhost element and required inclusion of either 'srvid' or 'port' attribute; improved the algorithms for generating SOCKS5 UNAME and PASSWD parameters; specified that the DST.ADDR and DST.PORT parameters may be ignored; removed references to connected/disconnected notification, bidirectional bytestreams, and multiple targets; updated implementation notes.
(psa/ds) 
Version 0.5 (2002-12-20)

Specified option of "reversing the connection" (Target becomes Initiator); added more error cases; resurrected and cleaned up formal use case.
(psa) 
Version 0.4 (2002-12-19)

Added section on connected/disconnected notifications sent from Proxy to Initiator; cleaned up several examples; specified more error conditions; clarified the formal descriptions; added implementation notes and future considerations.
(psa, mm) 
Version 0.3 (2002-12-17)

Added lots of detail to the narrative and protocol.
(psa) 
Version 0.2 (2002-12-16)

Added SOCKS info.
(ds) 
Version 0.1 (2002-12-13)

Initial version.
(ds) 

END